+86-15867685898

Home / News / Industry News / What problems should be paid attention to during the operation of the forming hollow blow molding machine

What problems should be paid attention to during the operation of the forming hollow blow molding machine

The fully automatic bottle blowing machine should master the following seven key points in the production operation:

The first point: in order to reduce the self-weight sagging of the parison, the hollow blow molding machine can speed up the extrusion rate of the parison under the permitted conditions and reduce the waiting time of the mold. This point should be strictly noted, and it is also prepared for the future maintenance of the machine.

The second point: in the production process, the molding cycle should be shortened as much as possible on the premise of ensuring that the product is fully cooled. I am sure you will come up with more ways.

The third point: the inflation pressure should be sufficient during operation, and the blowing rate should be fast.

Fourth point: During the implementation process, it is necessary to control the temperature, speed of the extruder and the P value of the melt.

The fifth point: the machine should ensure that the air is fully exhausted when the parison is inflated during operation.

Point 6: Operators should be familiar with the molding and processing properties of plastic materials in order to better utilize the advantages of the material itself.

Seventh point: The staff should control the wall thickness and quality of the parison. This is a technical job, and it is very important to hold the heat.

In the normal processing process of the hollow blow molding machine, various work procedures are mutually influenced and interdependent. In order to ensure the normal production and product quality of the hollow blow molding machine, it is necessary for the operator to adjust the process parameters in a timely manner. Here I hope that all operators should not only be familiar with the performance of various machines, but also understand the various characteristics of processed products and materials, so as to better implement the operation process. There will be no problems such as failures.