Home / News / Industry News / Common problems and troubleshooting of bottle blowing machine

Common problems and troubleshooting of bottle blowing machine

1. How much power water chiller should be equipped with the soda bottle blowing machine?
The chiller equipped with the carbonation bottle is about 5 pieces larger than the chiller equipped with the water bottle. A simpler algorithm can be calculated based on 1200 bottles/horse, for example, 36000 bottles/hour can be equipped with 30 water chillers. In order to ensure the stress requirements of the bottom of the carbonation bottle, the cooling time is generally 1.2 seconds, and the bottom mold temperature is 11 degrees. The number of lamp areas equipped with the heating furnace can refer to the configuration of the hot filling machine. The effective heating time of the preform shall not be less than 33 seconds.

2. What accessories should be checked during daily operation of the bottle blowing machine?
Operate the equipment in strict accordance with the methods in the instruction manual, and regularly check the performance of each safety door. The equipment is generally safe. However, the biggest hidden danger of the equipment is mainly on the seals of the water jacket and air jacket, such as the water jacket and air jacket are damaged, and the maintenance work is more troublesome.

3. How to deal with the deformation of bottle mouth produced by bottle blowing equipment?
Bottle mouth deformation Generally, during the heating process of the preform, the transmission chain drives the bottle base to transmit the temperature to the preform mouth. During the heating process, the temperature continuously accumulates, and the bottle mouth appears bulge deformation. It is only necessary to increase the air cooling or water cooling of the bottle mouth. If the customer's conditions permit, you can refer to the practice of imported machines and install central air conditioners in the production workshop to keep the ambient temperature of the workshop at room temperature.